
Product Details
Introducing The AIMS Power 800 Watt 12 Volt Modified Sine Power Inverter - An Inexpensive On-The-Go Power Solution
Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by this inverter is “blocky” resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road. Therefore, because of the type of waveform, the Modified Sine Wave Power Inverter are suitable for most applications.
This inverter is also more efficient in converting battery power to AC. So if you’re looking to make a pot of coffee run a heater or air conditioner or appliances that can withstand occasional electrical noise a Modified Sine Wave Inverter is a cost-effective solution.
To select the right inverter first determine what devices you would need to run in the event of a power outage. Then select the appropriate inverter that can carry the combined wattage requirements of these devices. Some appliances have a start up amperage.
AIMS Power 800 Watt 12 Volt Modified Sine Power Inverter Features
Provides 800 Watts Continuous And 1600 Watts Surge For Varied Appliances
Provides 800 watts of continuous power and 1600 watts surge capability. This ensures the inverter can efficiently power a variety of household appliances, including those with higher startup power demands, making it ideal for diverse usage needs.
Achieves Up To 95% Efficiency At 1/3 Load, Maximizing Battery Life
With up to 95% efficiency at 1/3 load, this inverter maximizes battery life by effectively converting DC to AC power. This ensures minimal energy waste, providing reliable power for your devices without unnecessary battery drain.
Equipped With Short Circuit, Over-Load, And Over-Temperature Protections For Safety
Equipped with short circuit, over-load, and over-temperature protection features, this inverter ensures your devices are safeguarded against unexpected electrical faults. Automatic shutdown functions help prevent potential damage, maintaining both device integrity and user safety.
Includes Dual AC Receptacles And LED Indicators For Easy Monitoring
The inverter includes dual AC receptacles and LED indicators to signal power status and fault conditions, facilitating easy monitoring and operation. The straightforward on/off switch ensures simple control, making it convenient for all users.
Weighs Only 2.6 Lbs With Dimensions For Easy Portability And Installation
Weighing only 2.6 lbs, with dimensions of 9.25”x 3.5”x 2.25”, this inverter is highly portable. Its lightweight and compact design make it easy to transport and install, fitting well in various settings.
Aluminum Case And Cooling Fan Ensure Optimal Temperature Control During Use
The aluminum case and integrated cooling fan provide effective heat dissipation, maintaining optimal operating temperatures. This feature ensures reliable performance and prevents overheating, even during extended use or in warmer environments.
AIMS Power 800 Watt 12 Volt Modified Sine Power Inverter Warranty
AIMS provides a 1-year warranty policy, ensuring the absence of defects in materials, workmanship, and performance during the warranty period.
AIMS Power 800 Watt 12 Volt Modified Sine Power Inverter Specifications
| Continuous Output Power | 800 Watts |
| Surge Power Capability (peak power) | 1600 Watts not meant for start up applications |
| Protection | Short circuit protection |
| DC Input / Operation Voltage | 10 to 15 Volts · Output voltage: 120 Volts ac |
| Output Wave Form | Modified Sine Wave |
| Output Frequency | 60 Hz |
| Battery Low Voltage Alarm | 10.5 +/- 0.5 Volts |
| Battery Low Voltage Shutdown | 10.0 +/- 0.5 Volts |
| No Load Current @ 12V | < 0.7 dc Amps |
| Full Load Efficiency | 90% |
| 1/3 Load Efficiency | 95% |
| No Load Minimum Operating Temperature | -15 degrees Celsius |
| Full Load Maximum Operating Temperature | 55 +/- 5 degrees Celsius (automatic shutdown) |
| AC Output Socket Type | dual Type 2 -3 prong |
| High Input Voltage Protection | 15.5V |
| Low Input Voltage Shutdown | 10.5V |
| Fuse Protection | Internal fuse protection |
| Dimensions (L x W x H) | 9.25”X 3.5”X 2.25” |
| Unit Weight | 2.6 lbs. |
| Boxed Weight | 4.0 lbs. |
